Remove Old Thermostat - Carrier TSTATCCREC01 Installation Instructions Manual

STEP #2
12:00
70
Cool
70 Set
Fan Auto
Turn off the power to the Heating/Air
MODE
FAN
Conditioning system at the main fuse
panel. Most residential systems have
a separate breaker for disconnecting
power to the furnace.
12:00
Cool 70
Set
Fan Auto 70
Remove the cover of the old thermostat.
MODE
FAN
If it does not come off easily check for
screws.
12:00
Cool 70
Set 70
Fan Auto
Loosen the screws holding the thermostat
MODE
FAN
base or subbase to the wall, and lift away.
12:00
Cool 70
Set 70
Fan Auto
Disconnect the wires from the old
MODE
FAN
thermostat. Tape the ends of the wires
as you disconnect them, and mark them
with the letter of the terminal for easy
reconnecting to the receiver.
12:00
Cool 70
Set
Fan Auto 70
Keep the old thermostat for reference
MODE
FAN
purposes, until your new thermostat is
functioning properly.

REMOVE OLD THERMOSTAT

Page 3