Dynex DX-SB114 Quick Setup Manual

FEATURES
Congratulations on your purchase
Top view
of a Dynex Soundbar Home
Theater Speaker System.
Package contents
Standby DSP
Soundbar
Back view
DC IN
Remote control
AC adapter
SUBWOOFER OUT
RCA audio cable
3.5 mm audio cable
Remote control
Wall mounting template
Before using your new product, please read these
instructions to prevent any damage.
# Item Description # Item
1 Standby indicator Lights when the soundbar is in standby mode. 10 RCA IN (R and L) jacks
2 (Power) button Press to turn on the soundbar. The indicator lights green.
and indicator Press again to return the soundbar to standby mode. 11 AUX IN jack
3 (Input) button Press repeatedly to cycle through the sound source options
(RCA>AUX IN>OPTICAL IN).
12 OPTICAL IN jack
4 DSP (Digital Signal Press repeatedly to cycle through the DSP sound modes:
Processor) button and • Standard - Lets you enjoy normal sound.
indicator • Theater - Best for enjoying movies. Bass frequencies
are enhanced. 13 (Power) button
• News - Select for clear voice reproduction.
The corresponding indicator lights to indicate the sound
14 INPUT button
mode selected.
15 DSP buttons
Press to activate the bass frequency enhancement. The
5 BASS button and indicator
indicator lights green. Press again to turn off the bass
frequency enhancement.
6 VOL +/– buttons Press to increase or decrease the volume of the soundbar.
16 BASS button
Use to hang the soundbar on a wall.
7 Hanging brackets
17 VOL +/– buttons
8 SUBWOOFER OUT jack Connect a powered subwoofer to this jack.
18 (Mute) button
9 DC IN jack Connect the AC adapter to this jack to power the soundbar.
CONNECT THE SOUNDBAR
Choose one connection option below that fits your audio source device (e.g., TV, projector,
DVD/Blu-ray player, gaming console etc.).
CAUTION: Turn off or unplug all devices while you are making connections.
NOTE: If you have multiple devices connected to a TV or projector, connecting directly to the TV or projector will ensure
audio plays through your soundbar from all of your devices.
Standard Theater News BASS VOL
AUDIO QUALITY
- PICK ONE -
AUX IN
R L
18V Digital connections (BEST)
RCA IN
OPTICAL IN 1 Connect one end of the digital optical cable (not included)
to your soundbar. Connect the other end into the Digital
Optical Output port on your audio source device.
DC IN R L AUX IN
18V
RCA IN
2 Change the device's audio output to 'PCM' format
SUBWOOFER OUT OPTICAL IN
(typically found in Audio Settings). Refer to the
documentation that came with your audio source device
(e.g., TV, projector, DVD/Blu-ray player, etc.) for more
information.
3 After connecting power, see USING YOUR SOUNDBAR on the
next page.
- OR -
AUX IN connections (GOOD)
1 Connect the right-angled end of the 3.5mm audio cable to
Description
your soundbar. Plug the other end into the Audio Output
If your TV (or other audio source device) has RCA OUT jacks,
connect the RCA cables to your source device and these jacks. port or headphone jack on your audio source device.
2 After connecting power, see USING YOUR SOUNDBAR on
If your TV (or other audio source device) has an AUX OUT or
the next page.
headphone jack, connect the 3.5 mm audio cable to your
source device and this jack.
If your TV (or other audio source device) has an Optical OUT
jack, connect a digital optical cable (not included) to your
source device and this jack.
- OR -
Press to turn on the soundbar. Press again to return the
soundbar to standby mode. RCA Audio connections (GOOD)
Press repeatedly to cycle through the sound source options 1 For an RCA audio connection, connect the right-angled
(RCA>AUX IN>OPTICAL IN).
connectors to your soundbar. Connect the other end of the
Press repeatedly to cycle through the DSP sound modes
RCA cables into the Audio Output ports on your audio
(Standard>Theater >News ). The corresponding indicator on
source device.
the soundbar top panel lights to indicate the sound mode
selected. 2 After connecting power, see USING YOUR SOUNDBAR on
the next page.
Press to activate the bass frequency enhancement.
NOTE: Make sure the cable ends match the color of the ports.
Press to increase or decrease the volume of the soundbar.
Press to mute the sound from the soundbar. Press again to
restore the sound.
JACK TYPE (on source device) CABLE
BEST
Digital optical cable (not included)
GOOD 3.5 mm audio cable (included)
GOOD RCA Audio cable (included)
TV, projector, or
DVD/Blu-ray player
OUTPUT
DIGITAL
OPTICAL
Digital optical cable (not included)
TV, projector, or
DVD/Blu-ray player
OUTPUT
AUDIO
3.5 mm audio cable (included)
TV, projector, or
DVD/Blu-ray player
OUTPUT
AUDIO
R L
RCA audio cable (included)
Soundbar Home Theater Speaker | DX-SB114
CONNECT THE SUBWOOFER
(OPTIONAL)
Connect one end of the subwoofer
speaker cable (not included) to the
subwoofer and the other end to the
soundbar.
CONNECT THE AC ADAPTER
Back of the soundbar
CAUTIONS:
• Make sure that the electrical outlet matches the AC adapter's input requirements of 100-240 V,
50/60 Hz before connecting.
• Use only the AC adapter provided.
DC IN R L AUX IN
18V
RCA IN • Plug in the AC adapter only after all other connections have been made.
SUBWOOFER OUT OPTICAL IN
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
2 Plug the other end of the AC adapter into a power outlet or surge protector.
Back of the soundbar
DC IN R L AUX IN
18V
RCA IN
SUBWOOFER OUT OPTICAL IN
4
POSITION YOUR SOUNDBAR
You can mount your soundbar on the wall
(go to Step 5).
Back of the soundbar
DC IN R L AUX IN
18V
RCA IN
SUBWOOFER OUT OPTICAL IN
Quick Setup Guide
Back of the soundbar
Subwoofer
DC IN R L AUX IN
18V
RCA IN
SUBWOOFER OUT OPTICAL IN
Subwoofer cable (not included)
Back of the soundbar
DC IN R L AUX IN
18V
RCA IN
SUBWOOFER OUT OPTICAL IN
You can set the soundbar on a flat surface
(go to Step 6).
- OR -
OVER