Remote Controller - JVC KD-AR260 Instructions Manual

Remote controller

RM-RK50
ATT
R SOURCE
VOL
1 • Turns on the unit if pressed when the unit is
turned off.
• Turns off the unit if pressed and held until
"SEE YOU" appears on the display.
• Drops the volume level in a moment if
pressed briefly.
Press again to resume the volume.
2 Selects the band while listening to the radio.
Each time you press the button, the band
changes.
3 Selects the preset stations while listening to
the radio.
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
SOUND
U
F
D
VOL
4 Functions the same as the control dial on the
main unit.
Note: These buttons are not used for adjusting
"DEMO", "CLOCK H", "CLOCK M",
"DIMMER", and "AMP GAIN" (see pages
8, 9 and 19).
5 Selects the sound mode (C-EQ: custom
equalizer).
Each time you press the button, the sound
mode (C-EQ) changes.
6 Selects the source.
Each time you press the button, the source
changes.
7 • Searches for stations while listening to the
radio.
• Fast-forwards or reverses the track if
pressed and held while listening to a CD.
• Skips to the beginning of the next track or
goes back to the beginning of the current (or
previous) tracks if pressed briefly while
listening to a CD.
5