Changing The Af Frame Mode - Canon PowerShot SD 1400 IS User Manual

Changing the AF Frame Mode

You can change the AF (Auto Focus) frame mode to match the conditions
you want to shoot.
Face AiAF
• Detects people's faces and sets the focus, exposure (evaluative metering
only) and white balance (
• When the camera is pointed at subjects, a white frame appears on the
face the camera judges to be the main subject, and gray frames (max. 2)
will appear on other faces.
• A frame will follow a moving subject within a certain range.
• When the shutter button is pressed halfway, up to 9 green frames will
appear on faces on which the camera focuses. If a face is not detected
when Servo AF (p. 87) is set to [On], the AF frame will appear in the
center of the screen.
• If a face is not detected and only gray frames (no white frame) appear,
up to 9 green frames will appear on the areas the camera focuses on
when the shutter button is pressed halfway.
• Examples of faces that cannot be detected:
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
Center
The AF frame is locked to the center. This is effective for focusing on a
specific point.
84
Choose [AF Frame].
●
Press the n button, choose the 4
tab, and then choose the [AF Frame]
menu item. Press the qr buttons to
choose an option.
only).