Turbo Button - DeLonghi Split Air Conditioner Owner's Manual

Operation of wireless remote control
This wireless remote control is universal, and it could be used for many units, some
buttons of this control which are not available to this unit will not be described below.
Remote control
¡ñ

TURBO button

Under Cool or Heat mode, press this
button can turn on or turn off the TURBO
function.After the TURBO function turned
on, the signal of TURBO will display.
The signal will be automatically cancelled
if changing the mode or fan speed.
TEMP button
Press this button, can select:setting
temperature (
rature( ),outdoor ambient temperature
( ).These temperature will show on the
indoor unit display. The temperature on
remote control is always setting temperature.
Outdoor ambient temperature is an
optional feature,which is unavaible for
this model.The temperature display
for will keep same as previous
temperature.
Names and functions of wireless remote control
), indoor ambient tempe-
I FEEL button
¡ñ Press this button once, to turn on the I
FEEL function, then the figure of I FEEL
icon will appear.
After this function started, the remote
control will send temperature to the main
unit in every 10 minutes.When repress this
button, this function will be turned off.
Note: I FEEL function refers to that
the air conditioner works
according to the ambient
temperature of the remote
controller.
+ button
¡ñ Presetting temperature can be increased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the ¡æ
o
( F) signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the AUTO mode.Temperature
of Celsius degree setting:16-30 ; for
Fahrenheit degree setting: 61-86.
- button
¡ñ Presetting temperature can be decreased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the ¡æ
o
( F) signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the AUTO mode.
6