Operating; Basic Operations; Usb Operation; Other Operations - LG NB3540 Owner's Manual

16

Operating

Basic operations

USB operation

1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION
on the remote control or F on the unit until the
function is selected.
To
Stop
Playback
Pause
3
Skip to the next/
previous file
Search for a
section within a
file
Play repeatedly
or randomly
Select a file
directly
Search a folder
Resume
playback
NB3540-NB_DSGPLLK_ENG.indd 16
Do this
Press Z.
Press d/M.
During playback, press d/M.
During playback, press V
on the remote control to go
to the next file.
Playing less than 2 seconds,
press C on the remote
control to go to the previous
file.
Playing after 3 seconds, press
C on the remote control
to go to the beginning of
the file.
Press and hold C/V
during playback and release it
at the point you want to listen
to. (except FLAC and OGG
files)
Press REPEAT on the remote
control repeatedly, the
display will be changed in the
following order, OFF RPT 1
RPT DIR (DIRECTORY) RPT
ALL RANDOM.
Press 0 to 9 numerical buttons
on the remote control to go
to the desired file directly.
Press FOLDER W/S on the
remote control.
This unit memorizes a current
song which is played before
changing the function or
turning off the unit.
,
Note
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.

Other operations

DRC (Dynamic Range Control)

Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.

AV Sync

When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use C/V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
,
Note
This function does not operate on USB
function.

Turn off the sound temporarily

Press MUTEi to mute your unit.
You can mute your unit, for example, to answer
the telephone, "MUTE" is displayed in the display
window.
To cancel it, press MUTEi again on the remote
control or change the volume level.
Displaying file and input
source
You can display various information of the input
source by pressing INFO.
USB : File information contained on a USB (MP3/
WMA/OGG/FLAC/WAV)
OPTICAL : Audio format, Audio channel
2014-01-22 9:11:30