Functional Description; Technical Data; Intended Use; Product Features - Bosch GDA 280 E Professional Original Instructions Manual

OBJ_BUCH-428-002.book Page 16 Wednesday, November 12, 2008 3:21 PM
16 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for dry sanding and
polishing of wood, plastic, metal, filler, as well
as for painted surfaces. It is ist especially suita-
ble for profiles, corners or hard to reach loca-
tions.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselec-
tion
3 Extraction outlet
4 Sanding sheet*
5 Sanding plate
6 SDS button for release of the sanding plate
7 Vacuum hose*
8 Pad extender*
9 Sanding plate for extender*
10 Narrow pad extender*
11 Narrow rounded pad extender*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 N92 | (12.11.08)

Technical Data

Delta Sander
Article number
Rated power input
No-load speed min
No-load orbital stroke
rate min
Sanding plate size
(corner to corner)
Orbit diameter
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 80 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
GDA 280 E
Professional
0 601 294 7..
W 280
-1
6500 – 9500
-1
13000 – 19000
mm 94
mm 2.0
kg 1.1
/II
2
=4.5 m/s , Uncer-
Bosch Power Tools