System Or Device; Network Configuration; Physical Layer - ABB RER601 Technical Manual

Section 10
Appendix 2 IEC 60870-5-104 interoperability
10.1.1
10.1.2
10.1.3
78
Function or ASDU is not used
Function or ASDU is used as standardized (default)
Function or ASDU is used in reverse mode
Function or ASDU is used in standard and reverse mode
The possible selection (blank, X, R, or B) is specified for each specific clause or
parameter.
A black check box indicates that the option cannot be selected in this companion
standard.
Function or ASDU is planned, contact the product management

System or device

(System-specific parameter, select one definition of a system or a device by
marking with an "X".)
System definition
Controlling station definition (Master)
Controlled station definition (Slave)

Network configuration

(Network-specific parameter, all configurations that are used are to be marked with
"X".)
Point-to-point
Multiple point-to-point

Physical layer

(Network-specific parameter, all interfaces and data rates that are used are to be
marked with "X".)
Transmission speed (control direction)
Multipoint
Multipoint-star
1MRS757105 B
RER601/603
Technical Manual