SonicWALL PRO 2040 Getting Started Manual page 12

7. SonicWALL Configuration Summary - Displays your network configuration
information.
The above figure displays a sample Configuration Summary page using NAT
Enabled with a Static IP address. This page is divided up into three sections that
display settings for each interface on the device. Confirm that the settings displayed
match the information you created in the section Step 1: "Collecting Required
Information" on page 2.
If you need to make changes, click the Back button. If the configuration settings are
correct, click Apply to apply your settings to the SonicWALL security appliance. If
you click Cancel, no settings will be applied to the SonicWALL security appliance.
The Storing SonicWALL Configuration page with a yellow status indicator displays,
showing that the SonicWALL PRO 2040 is storing the new configuration. When it is
finished the Setup Wizard Complete page displays.
8. Setup Wizard Complete - Your SonicWALL PRO 2040 is now successfully
configured for LAN and Internet access. Click Restart to reboot your
SonicWALL PRO 2040 and complete the configuration process.
SonicWALL PRO 2040 Getting Started Guide Page 11