Adjusting The Osd Settings - AOC 7F-SLK User Manual

Adjusting the OSD Settings

1. Press the Shuttle Knob to open the OSD
window.
2. Rotate the Shuttle Knob until the desired
function is highlighted.
3. Press the Shuttle Knob again to open the
function's window.
4. Rotate the Shuttle Knob to change the settings
of the function.
AOC 7F-SLK
Operating Instructions
5. To save and exit, select the exit function or
leave the monitor alone for 10 seconds. If you
want to adjust any other function, repeat steps
2-4.
Note: When the OSD window is open, the input
signal timing settings appear at the top.
H: stands for horizontal frequency and
V: stands for vertical frequency.
9
AOC 7F-SLK
v2_123102