8. FUNCTION OF THE CONVENIENT SERVICE
The test mode of the load movement
You can check the PCB ASS'Y and the condition of each load movement simply.
• The method to enter
1 Press the Power switch button.
2 Press the Option button 3 times while press the Temp button.
At this time, the version is displayed on the Custom LED
3 Each load makes a movement as follows, whenever the Time Delay button is pressed a time.
1200(RPM)
L C (Lock Close)
C (Cold valve)
dr (drain pump)
The check mode of the water level frequency
You can check the beginning frequency and the frequency by the variation of the water level.
• The method to enter and operate
1 Press the Power switch button.
2 Press the Time Delay button 3 times while press the Temp button and the Spin button.
3 the beginning display on "18:88 LED" is the current frequency of the water level.
5 6 2
ex)
: It display three number except the first number of 25.62kHz
4 When you press the Temp button a time
30
FUNCTION OF THE CONVENIENT SERVICE
C:H (Cold/Hot option)
H (Hot valve)
P (Pre-Wash valve)
L O (Lock switch Open)
= 25.62kHz
2 times
3 times
bb (bubble)
Cold valve On
Cold valve Off
Drain pump On