D-Link DGE-530T Manual page 14

32-bit gigabit network adapter

Hide thumbs Also See for DGE-530T:

Table of Contents

DGE-530T Gigabit Ethernet Adapter Card

To add a VLAN setting to this window, click the Add VLAN button at the bottom of this screen,

which will open the following configuration window.

To set the VLAN, first select a Virtual LAN ID using the scroll up and down buttons. Available

VLAN IDs are usually between 1 and 4094 but be sure to select the correct one, depending on the

device's settings to which the NIC is connected. Next, add the VLAN name on the remote device in

the Virtual LAN Name field. The user can then adjust the Transmit and Receive Buffers in the

following two fields, but it is recommended that the user not adjust these two unless they are

sure of the proper settings. Once completed, click OK. The user can configure up to 64 VLAN

settings for this device.

Once completed, the new settings will appear in the Virtual LAN window, marked by its VLAN, as

shown in the following example, with the setting of VLAN 24.

Table of Contents