Tuning In To A Preset Station; Selecting Fm Reception Mode - JVC KW-XC888 Instructions Manual

4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when power supply to the
memory circuit is interrupted ( for example, during
battery replacement). If this occurs, preset the
stations again.

Tuning in to a preset station

You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see page 7.
1
Select the band (FM1, FM2, FM3, or
AM) you want.
2
Select the number (1 – 6) for the
preset station you want.
EX.: When you press number button 1
8

Selecting FM reception mode

When an FM stereo broadcast is hard to
receive:
Preset number
Press MONO/SSM briefly so that
MO indicator lights up on the
display ("MONO" appears on the
display).
Each time you press the button,
the MO indicator goes on and off
alternately.
MO (monaural) indicator
When the MO indicator is lit, the sound you
hear becomes monaural but reception will be
improved.