Download Print this page

Wireless Interface Specifications - Omron WE70 User Manual

Fa wireless lan unit reliable wireless ethernet for harsh fa environments conforms to ieee 802.11a/b/g

Advertisement

Specification
■ Ratings
Model
Item
Power
Rated voltage 24 V DC
supply
Allowable
voltage range
Current
consumption
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Ambient operating
temperature
Ambient operating humidity 25% to 85% (with no condensation or icing)
Ambient storage
temperature range
Degree of protection
Terminal
Power
construction
terminal
Applicable Standards
Weight
Note: Provide a power supply of at least 30 W, considering the inrush current generated at startup.

■ Wireless Interface Specifications

Item
Standards
Wave type
Orthogonal Frequency Division
Multiplexing (OFDM), Simplex
Frequency band
Refer to the following Frequency Bandwidths and Channels by Area on page 8.
Number of channels
Refer to the following Frequency Bandwidths and Channels by Area on page 8.
Baud rate (See note 1.)
Auto or 54, 48, 36, 24, 18, 12, 9, or
6 Mbps
Maximum Transmission
Indoors: Approx. 40 m (with enclosed
Distance (Line of Site)
Pencil Antenna at 54 Mbps) (Outdoor
(See notes 2 and 3.)
use prohibited.)
Security
OCB AES (128 bit), WEP KEY (OMRON'S original encryption), WEP (64/128/152 bit),
WPA-PSK (with AES <128 bit>/TKIP <128 bit> encryption)
Transmitter output power 10 mW/MHz max.
No. of connected clients
63 max.
Variable transmission
3 levels: (High/Mid/Low)
power
If high communications distance is 100%, medium is 50%, and low is 25%. (See note 2.)
Roaming function
Provided
Repeater function
Provided (Communications between access points, 6 repeaters max.)
Note: 1. Theoretical value of the Wireless LAN Standards, not the actual baud rate.
2. Depends on the installation environment.
3. The distance will be shorter when using a Magnetic-base Antenna or an extension cable.
WE70-AP
Access Point (Master)
20.4 to 26.4 V DC
250 mA max. (See note.)
20 M Ω min. (at 100 V DC) between the power supply and mounting bracket
1,500 V AC for 1 min between power supply and mounting bracket
IEC 61000-4-4. 1 kV (power supply line)
JIS C0040
Frequency: 10 to 55 Hz; Amplitude of 0.35 mm or acceleration of 50 m/s
10 sweeps of 8 min each (i.e., 80 min in total) in X, Y, Z directions
Conforms to JIS C0041: 300 m/s
0 to 50 ° C (with no condensation)
− 20 to 65 ° C
IP20
Screwless terminal block (Phoenix Contact AI 0.75-10 or equivalent)
FCC, UL (USA), CE Marking (EU), Chinese Electromagnetic Standards (Mainland China)
360 g max. (Wireless LAN Unit only)
Conforms to IEEE 802.11a
2
3 times each in X, Y, and Z directions
Conforms to IEEE 802.11b
Direct Sequence Spectrum Spread,
Simplex
Auto or 11, 5.5, 2, or 1 Mbps
Indoors: Approx. 60m (with enclosed Pencil Antenna at 54 Mbps)
FA Wireless LAN Unit
WE70-CL
Client (Slave)
2
, whichever is smaller
Conforms to IEEE 802.11g
Orthogonal Frequency Division
Multiplexing (OFDM), Simplex
Auto or 54, 48, 36, 24, 18, 12, 9, or
6 Mbps
WE70
7

Advertisement

loading