DeWalt DCT410 Instruction Manual page 11

L. Camera: Press this button for taking a photo.
M. Record: Press this button to start and stop recording
a video.
N. Main Menu: Press this button to show a list of options for
operating the inspection camera or to exit a screen.
O. Back Arrow: Press this button to navigate backward.
P. OK: Press this button to save changes.
Q. Forward Arrow: Press this button to navigate forward.
R. Power indicator for the handle set: When the green
light is on it indicates that the handle set is on.
S. Reset button
INTENDED USE
The inspection camera is designed to play real-time video while looking
into walls and/or tight spaces. With a micro SD card (sold separately),
the tool can then take photos or record videos for documentation
purposes.
Photos are saved in JPG format and videos are saved as AVI. This
D WALT inspection camera is compatible with micro SD memory
E
cards up to 16 gigabytes.
Applications consist of automotive inspection, plumbing inspection,
HVAC inspection or cable routing. Read the entire manual before using
this inspection camera.
DO NOT use in presence of flammable liquids or gases. The camera
cable extension is waterproof up to the camera connector. DO NOT
USE the handle set under wet conditions.
The inspection camera is a professional tool. DO NOT let children
come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
ASSEMBLY
Screen (Fig. 4)
When the screen is attached to the
handle set with a battery, it will receive
a charge from the battery. Ensure the
screen is fully charged before use.
When the screen is disengaged from
the handle set, a battery icon appears
in the upper left corner. This icon
also displays the current charge of the
screen.
To install the screen (E) into the handle
set (G), align the screen with the rails
on the handle set and slide it firmly into
the handle until you hear the lock snap
into place.
To remove the screen from the handle
set, firmly slide the screen up from the
tool handle.
The screen can be turned on and viewed when it is not attached to the
handle set, allowing easier maneuverability of the camera.
Camera Cable (Fig. 5)
Align the camera cable with the camera connector (D). Push in and
turn the connector counterclockwise (camera screen facing you) to
firmly attach.
9
FIG. 4
E
G