Cabinet Disassembly Instructions - FUNAI LC320SLX Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

[LC320SLX, 32MF339B/F7, LC320SSX]
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[10] Junction
[2] Rear Cabinet
CBA
[3] Inverter CBA
[4] Jack CBA
[5] Power Supply
CBA
[6] Jack Holder
[7] Digital Main
CBA Unit
[13] LCD Module
Assembly
[14] Front
Cabinet
2. Disassembly Method
Step/
Loc. Part
Fig.
No.
No.
Stand
[1] D1 4(S-1)
Assembly
Rear
[2] D1 13(S-2), 2(S-3), 3(S-4)
Cabinet
6(S-5), *CN1001,
Inverter D2 *CN1003, *CN1050,
[3]
CBA D4 *CN1100, *CN1150,
*CN1200, *CN1900
D2
[4] Jack CBA 2(S-6), *CL701B
D4
Power 7(S-7), *CN101,
D2
[5] Supply *CN301, *CN302,
D4
CBA *CN801, *CN802
[8] Speaker
Holder (L,R)
[9] Speaker(s)
[11] IR Sensor
CBA
[12] Function
CBA
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
---
---
---
---
---
Step/
Loc. Part
Fig.
No.
No.
[6] Jack Holder D2 2(S-8)
Digital Main D2
[7]
CBA Unit D4
Speaker
[8] Holder D3 *Hook
(L,R)
[9] Speaker(s) D3 8(S-12)
Junction D3
[10]
CBA D4
IR Sensor D3
[11]
CBA D4
Function D3
[12]
CBA D4
LCD
[13] Module D3 (S-15)
Assembly
Front
[14] D3 ---------------
Cabinet
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
4-1
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
4(S-9), 2(S-10),
4(S-11), *CN3902,
Shield Box
Desolder
2(S-13), *CL103C
2(S-14)
↓
(4) (5)
A91F3DC
---
---
---
---
---
---
---
---
---
↓