Other Main Functions; Setting The Clock; Changing The General Settings (Psm) - JVC KD-SH55 Instructions Manual

Setting the clock

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 18.)
2
Set the hour.
1 Select "CLOCK HOUR" if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK MIN."
2 Adjust the minute.
1
4
Press SEL (select) to finish the setting.
To check the current clock time while the unit
is turned off, press DISP (D) (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.

OTHER MAIN FUNCTIONS

2
2
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode)
control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 18.)
2
Select a PSM item you want to adjust.
(See page 18.)
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Press SEL (select) to finish the setting.
17