Table of Contents
Advertisement
Error Display (LCD Display of F-PCB)
INPUT
1. Temperature Control Buttons
1. How to start
1) Set "LOCK ON" first.
2) Push "LOCK" button 3 times while pushing "REF SET." button at the same time.
2. Display
Error code is displayed on Freezer temperature display part.
3. How to stop
1) Push "LOCK" button 3 times while pushing "REF SET." button.
2) It stops automatically 4 minutes after the start.
4. All the error Ccdes are reset if they turn to be normal.
5. Error Code
ERROR CODE
F1
r1
rt
d1
dr
dF
dH
C1
F3
d2
CUSTOM LCD
CONTENTS
CONTENTS
F-sensor ; disconnection, short(pull-down)
R-sensor ; disconnection, short(pull-down)
RT-sensor ; disconnection, short(pull-down)
D-sensor ; disconnection, short(pull-down)
R-Door Switch ; defective
F-Door Switch ; defective
Homebar (Refreshment Center) Door Switch ; defective
Cycle ; abnormal or defective.
Return after defrosting ; abnormal or defective
Forced defrosting mode for A/S
- 25 -
Control Object
REMARKS
Hide quick links:
Advertisement
Table of Contents
