Preparing the machine
Thread cones/spools
The anti-vibration cone should be used with the wider edge
at the bottom on the spool holder pin when sewing with
cones.
Large spools
If large industrial spools are used, position the anti-vibration
cone upside down on the spool holder pin, i.e. with the wider
edge at the top.
Household spools
Remove the anti-vibration cones. Place spools on spool
holder pins and push the spool capon with the rounded side
downwards.
Thread net
If threading slip and get twisted, cover the spools of upper
and lower looper with the nets supplies in the accessory bag.
6