Alcatel ONETOUCH 6050A User Manual page 9

To install, place the SIM card with the chip facing downwards in to the
housing, and then slide it into its slot. Make sure that it is correctly inserted.
To remove the card, press and slide it out.
Your phone only supports micro-SIM cards. Do not attempt to
insert other SIM type like mini and nano card, otherwise this may
cause phone damage.
Installing or removing the microSD card
15
Insert the microSD card with the golden contact facing downwards into
the slot. To remove the microSD card, gently press and slide it out.
To avoid data loss and SD card damage, before removing the SD
card, please ensure that the SD card is unmounted (Settings\
Storage\Unmount SD card).
Charging the battery
Connect the battery charger to your phone and mains socket respectively,
the LED indicator will light while charging.
• Make sure the battery is correctly inserted before connecting the
charger.
• When using your telephone for the first time, charge the battery fully
(approximately 3 hours).
You are advised to fully charge the battery (
indicated by a percentage displayed on screen while the phone is powered
off. The percentage increases as the phone is charged.
To reduce power consumption and energy waste when the battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.
). Charging status is
16