Tape Removal Method At No Power Supply; Disc Removal Method At No Power Supply - Pioneer DV-PT100-S Service Manual

1

7.2 TAPE REMOVAL METHOD AT NO POWER SUPPLY

1. Remove the Top Cabinet, Front Cabinet and DVD Block. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2. Remove one screw 1 of the Deck Chassis and remove the Loading Motor. (Refer to Fig. 2)
3. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
A
4. Rotate the Clutch Assy either of the directions to wind the Video Tape in the Cassette Case.
5. Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to scratch on the
tape.
B
C

7.3 DISC REMOVAL METHOD AT NO POWER SUPPLY

1. Remove the Back Cabinet and TV//DVD/VCR Block. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2. Rotate the Main Gear in the direction of the arrow by hand. (Refer to Fig. 1)
3. Draw the Tray.
D
E
F
88
1
2
Fig. 1
Main Gear
DV-PT100-S
2
3
Loading Motor
Screw
1
Pinch Roller Cam
Main Cam
Main Chassis (Front Side)
DVD Deck
Fig. 1
3
4
Capstan DD Unit
Clutch Assy
Fig. 2
4