Cf Master/Slave Selection - Vox PMB-472LF User Manual

2-36. CF MASTER/ SLAVE SELECTION
JP3 : CF Master/ Slave Selection.
The selections are as follows:
SELECTION
Master
Slave
** Manufacturing Default: Master**
Because ATA33 cable and ATA66/100 cable pin34 specification
are different, therefore, while CF card and other devices are using
IDE 1 channel at the same time, the ATA66/100 cable will make the
device detecting time expand. Thus, it is suggested to use ATA33
cable to avoid the problem.
When CF card and other devices are using IDE1 channel at the same
time, please refer to "Chapter 4: Award BIOS Setup" to set BIOS in
Integrated Peripherals/ OnChip IDE Device/ IDE DMA transfer access/
DISABLED.
PMB-472LF USER
JUMPER SETTING
'
S MANUAL
Chapter 2 Hardware Configuration
1-2
Open
JUMPER
ILLUSTRATION
Page: 2-31