Maximum Values - Panasonic KX-TDE100 Pt Programming Manual

2.1.2 Maximum Values

Programming
Number
[3XX]
[4XX]
[5XX]
[6XX]
[7XX]
[8XX]
[9XX]
2.1.2 Maximum Values
Throughout this manual, maximum entry values are shown for each programming item, as shown in the
example below.
[351]
ENTER
However, please note that slot and port entry values are not listed within each programming item. These values
vary depending on the model of PBX and the card type installed, as shown below.
Available Slot Entry Values
KX-TDE100/KX-TDE200
PBX Model
KX-TDE100
KX-TDE200
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
16 PT Programming Manual
Programming Group Title
TRS/ARS Programming
CO Line Programming
COS Programming
Extension Programming
Resource/Interface
Programming
SMDR & Maintenance
Programming
Card Programming
Carrier Table No. Trunk Group No.
KX-TDE100: 01–10 KX-TDE100: 01–64
KX-TDE200: 01–10 KX-TDE200: 01–64
KX-TDE600: 01–48 KX-TDE600: 01–96
Free Slot Number
01–06
01–11
Description
TRS and Automatic Route Selection (ARS)
programming
CO line and trunk group settings
Class of Service parameters
Extension feature settings
PBX interface and external device settings
Station Message Detail Recording (SMDR) and
maintenance feature settings
Used to display the cards currently installed in the
PBX, or to delete a card from system programming
before physically removing it.
SELECT SELECT
Disable/
Enable ENTER
These values vary by PBX model
All cards
END
Supported Cards
Document Version 2009-12