Disc Operations - JVC KD-AV7100 Instructions Manual

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
• Playback will stop after playing back all chapters/tracks on the disc.
If " " appears on the monitor, the unit cannot accept the operation you have tried to do.
• In some cases, without showing the message, operations will not be accepted.
Label side
~
~
Insert a disc.
• Without turning on the power, you cannot
insert the disc.
Ÿ
Open the monitor panel.
• If "TFT Auto Open" is set to "On," the monitor automatically comes out when you turn on the unit. (☞ page 42)
• For the space required for monitor ejection, see page 55.
Ÿ
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
15
OPERATIONS