Advertisement
INSTRUCTION MANUAL
Hydraulic Punch Driver
38456, 38520, 7306/7306SB,
7310/7310SB, 7506, 7606SB, 7610SB,
7625/7625Pg/7625PgSB,
7646/7646Pg/7646PgSB
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
99996065
© 2011 Greenlee Textron Inc.
IM 1066 REV 8 1/11
Advertisement
Related Manuals for Greenlee 38456
Summary of Contents for Greenlee 38456
- Page 1 7310/7310SB, 7506, 7606SB, 7610SB, 7625/7625Pg/7625PgSB, 7646/7646Pg/7646PgSB Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 99996065 © 2011 Greenlee Textron Inc. IM 1066 REV 8 1/11...
-
Page 2: Table Of Contents
Refer to the instruction manual supplied with the punch for individual punch capacities. All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Kwik-Stepper, Slug-Buster, and Slug-Splitter are registered trademarks of Greenlee Textron Inc. -
Page 3: Important Safety Information
Wear eye protection when operating or servicing this tool. Failure to wear eye protection could result in serious eye injury from flying debris or hydraulic oil. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 4 This punch system was designed for a maximum operating pressure of 450 bar (6500 psi). • Use this punch system with the Greenlee 767 Hand Pump or 1725 Foot Pump only. • Connect the pump to the ram with Greenlee hoses and couplers only.
-
Page 5: Setup And Operation Instructions
10. Release the pressure at the pump. 3/8" Adapter Draw Stud Punch Spacer Material Punch Spacer as needed Material 3/4" Draw Stud Punch Material 1-1/8" Sleeve Completed Assembly Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 6: Illustrations And Parts Lists
7625 Hydraulic Punch Driver with 1725 Foot Pump For punching mild steel, 3/8" drive: For punching stainless steel: 50294512 52042828 50294520 (for use with Slug-Splitter punches and dies) Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 7 30206 30206 Plastic Carrying Case 18402 18402 Plastic Carrying Case 23955 23955 Metal Carrying Case 30236 30236 Plastic Carrying Case 31068 31068 Metal Carrying Case Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
- Page 8 28161 28161 1-1/4" Slug-Splitter Die 28162 28162 1-1/2" Slug-Splitter Punch 28163 28163 1-1/2" Slug-Splitter Die 28165 28165 2" Slug-Splitter Punch 28166 28166 2" Slug-Splitter Die Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
- Page 9 Supplied with the 746 and used with standard punches and Slug-Buster punches 50294520 Supplied with the 746 SS and used with Slug-Splitter punches and dies Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 10: Maintenance
800-435-0786 Fax: 800-451-2632 815-397-7070 Fax: 815-397-1865 Canada 800-435-0786 Fax: 800-524-2853 International +1-815-397-7070 Fax: +1-815-397-9247 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 • An ISO 9001 Company Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...