Table of Contents
Advertisement
100
The shutter speed is slow in
tripod to avoid camera shake.
In
,
increase and cause noise in the image depending on the
scene being shot.
With
In
LCD monitor may differ from the brightness that is actually
recorded. Be sure to check whether the image was taken in
the brightness you intended.
When shooting with a shutter speed slower than 1.3
seconds in
shoot the next picture due to noise reduction processing
performed after shooting.
ISO 3200
Selects the highest possible ISO speed
(3200, twice the ISO 1600 speed) and
increases the shutter speed to minimize
blurring of moving subjects and camera
shake, even in low light conditions.
Recording pixels are fixed at
aspect ratio 16:9 mode).
Color Accent
Use this option to have only the color
specified in the screen remain and to
transform all others to black and white
(p.
147).
Color Swap
Use this option to transform a color specified
in the screen into another
,
,
,
, image noise may be prominent.
mode, the brightness for an image displayed in the
mode, you must wait a while before you can
or
mode. Always use a
or
mode, the ISO speed may
(
in the
(p.
149).
Advertisement
Table of Contents
