REMOVING THE REFRIGERATOR DOORS
If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors.
Removing and Installing the Fridge door
A few things to mention first.
•
Make sure that you lift the door straight up so the hinges are not bent or broken.
•
Be careful not to pinch the wire harness on the door.
•
Place doors on a protected surface to prevent scratching or damage.
1. Remove the upper hinge cover
pulling them apart
2. Remove hinge screws
off the upper hinge
3. Remove the door from the lower hinge
4. After the refrigerator is placed to the specified position, install the fridge door in the reverse
order as follows:
using a screwdriver, and then disconnect the wires by gently
1
.
2
1
and the ground screw
3
. Be careful that the door does not fall on you as you are removing it.
5
3
4
5
7
6
by turning counter-anticlockwise, and take
4
by carefully lifting the door straight up
6
2
.
7
setting up _11