How To Read This Manual; How To Use The Mode Button - JVC GET0248-001B Instruction Manual

How to read this manual

The following methods are used to made the
explanations simple and easy-to-understand:
• Some related tips and notes are explained in
"More about this receiver" (see page 28).
• Button operations are mainly explained with
the illustrations as follows:
The following marks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
4
Press briefly.
Press repeatedly.
Press either one.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.

How to use the MODE button

If you press MODE, the receiver goes into
functions mode, then the number buttons and
5/∞ buttons work as different function buttons.
Ex.: When number button 2 works as
MO (monaural) button.
Time countdown indicator
To use these buttons for original functions
again after pressing MODE, wait for
5 seconds without pressing any of these buttons
until the functions mode is cleared.
• Pressing MODE again also clears the
functions mode.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.