Table of Contents
Advertisement
Pixel Alignment and Fine Adjustment
Use this section to adjust, fine tune any slight errors in the horizontal/vertical pixel alignment. It is found under the [INSTALLATION]
menu tab.
Adjust
Select this function to turn the pixel alignment function ON and OFF.
Settings: Off, On
Adjust Area
Use this function to set the overall pixel adjustment range.
Settings: Whole, Zone
Whole Selects the entire screen as the adjustment area.
Zone
The screen is divided into 11 x 11 sections for fine adjustment
(*) Note the size of the individual zones cannot be changed
Adjust Color
This function selects the color of the pixels you want to adjust.
Settings: Red, Blue
Adjust
Pattern Color
This function sets the pattern color.
Settings: White, Green + [Adjust Color]
White
Sets the adjustment pattern to white.
Green + Sets the pattern to green and the color set using the [Adjust Color] items.
[Adjust Color]
Adjust [Pixel]
Use this to move the color selected previously [Adjust Color], pixel by pixel in the vertical and horizontal directions.
(*) This function is disabled with the [Adjust Area] is set to [Zone]
H (Horizontal) Settings: -2~2
V (Vertical) Settings: -2~2
Adjust [Fine]
Use this to move the color selected previously [Adjust Color], pixel by pixel in the vertical and horizontal directions.
H (Horizontal) Settings: -31~31
V (Vertical) Settings: -31~31
Reset
Returns all settings to the original default factory settings.
SDC-15
10
Advertisement
Table of Contents
