Circuit Breaker Panel; Courtesy Lights Switch; Bilge Pump Switch - Supra Comp Owner's Manual

Table of Contents

Advertisement

Circuit Breaker Panel

The circuit breaker panel contains breakers for all electrical
equipment. The panel is located below the dashboard on the
side wall nearest the driver's left knee.
If a switch fails to operate, locate the corresponding circuit
breaker and press the reset button. If the equipment still does
not operate, notify your Supra dealer.

Bilge Pump Switch

The bilge pump switch operates in two positions. The manual
position is used to verify that the pump is operational.
The automatic pump function is engaged at all other times so
that any excess water in the bilge may automatically be
pumped out.
NOTICE: If the Bilge Pump fails to operate in the manual
position, press the circuit breaker reset button labeled
BILGE. If the bilge pump still does not operate, notify
your Supra dealer.
© 2002 Skier's Choice, Inc.
— or —

Courtesy Lights Switch

The Courtesy Lights switch supplies power to the interior lights
located to the rear of the helm.
NOTICE: If lights fail to operate, press the circuit breaker.
V-Drive Warning Light
The V-Drive transmission in your Supra is equipped with a
"low pressure" warning light. This light is located by the
dash. Do not operate your Supra if the warning light remains
on, whenever the engine speed is above, 1,200 RPM (+/-
400 RPM). This warning light should be on whenever the
engine speed is below 1,200 RPM (+/- 400 RPM). If this
light remains on during operation above idle, shut your
engine off immediately and check your v-drive oil level and
see your dealer.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents