Wireless Zone Assignments For 5700 Series Transmitters - ADEMCO VISTA-120 Installation And Setup Manual

Wireless Zone
Assignments for
5700 Series
Transmitters
–34–
Each wireless zone can be assigned any zone response type, such as Entry/Exit,
Interior Follower, Perimeter, etc. (see the ZONE TYPES section for explanations
of each zone type). For 5700 series transmitters, each response type uses a
certain range of zone numbers. Each range of zone numbers is indicated below:
5700 Series Zone Response Types
Zone Type
Entry/Exit Burg...............................1 through 47 *
Perimeter Burg................................1 through 47 *
Interior Burg ...................................1 through 47 *
Fire ...................................................48 through 63 *
24 Hour Panic ..................................48 through 63*
(silent or audible) ............................62 or 63 *** (5701)
Day/Night Burglary ........................1 through 47 *
24 Hour Auxiliary............................1 through 47 *
* Note that zones 1-63 can be used, but have the following limitations:
1. Transmitters set for zones 48-55 will transmit once every 12 seconds while
the zone is faulted. Transmitters set for zones 56-63 will transmit once every
3 seconds while faulted. These two ranges of zone numbers could adversely
affect transmitter battery life.
2. Transmitters set for an ID of 32 through 47 will have a 3 minute lock-out
between transmissions. Use this last range of zone ID numbers for sensors
protecting frequently used doors or windows to conserve battery life.
** Transmitter IDs 48 through 55 have highest signal priority.
***Transmitter IDs 62 and 63 are unsupervised to allow removal of the 5701 off
premises -- signal priority is lower than that of fire, but higher than burglary.
Trans/Zone #
32 through 47 * (5775)
48 through 55 ** (5706)