Editing Bridged Ethernet Adsl Service Configuration - Alcatel Speed Touch PC Installation Manual

Alcatel Speed Touch™ PC
Installation Guide
information. When not connecting to a DHCP server, enter the IP address
(e.g. 192.168.4.39).
8. Enter the Subnet Mask (e.g. 255.255.255.0).
9. Enter the Default Gateway address.
Note: Consult your ISP for the TCP/IP Properties.
10. Select the DNS Configuration tab
and enter the Host Name (e.g.
speed_touch)
11. Then enter the Domain Name
(e.g. pacbell.net)
Note: Use the DNS Service
Search and Domain Sufix Search
to locate the Host Name and
Domain. Click Add to save the
address. Repeat the process for
additional DNS entries.
12. Click OK to update the changes.
Note: Consult your ISP for the
TCP/IP Properties.
13. The system must be restarted for
the changes to take effect. Click
Yes to restart.
Congratulations, your Speed
Touch to the Internet is
established!
EDITING BRIDGED ETHERNET
ADSL SERVICE
CONFIGURATION
1. This section includes the IP
configuration specifics for Windows NT4.0. The NT 4.0 windows are
slightly different from those of Windows 95 /98. Other than these
page 33