Resetting To Factory Settings - Topfield TF 6000 PVRt User Manual

28 Service Search

4.2 Resetting to factory settings

transponder. To do that, set the Search Mode option to Manual,
and then at the Channel option select your desired transponder.
The number ranges from 6 to 12 in VHF and 28 to 69 in UHF.
To search one service of a transponder, set the Search Mode
option to Advanced, and at the PID option specify the PIDs of
your desired service with the numeric buttons. PID (Packet
Identifier) is a set of numbers that identifies transport stream
packets.
To start service search, select the Start Search item; then a list
box appears, in which found services will be listed. When it has
completed, press the
at any time or to exit without saving, press the
The digital receiver maintains the following data:
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. To do that, select
the Installation
for confirmation. If you select Yes, service entries, favourite
entries and timer events will all be deleted, and preference
options will be reset to the manufacturer's factory settings.
NOTE
A factory reset will not delete any recorded programmes.
button to save found services. To stop
OK
Factory Setting menu, and then you are asked
button.
EXIT