Listening To The Radio - Sharp XL-DAB10NH Operation Manual

Advanced USB playback (continued)
■ Random play
The tracks can be played in random order automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control. Press the / (USB
To cancel random play:
Press and hold the PLAY MODE button. "RANDOM" will
disappear.
Notes on random play:
●
During random playback, repeat function is not
possible.
●
Playback will stop after all the tracks is played
randomly.
●
If you press the button during random play, you can
move to the track selected next by the random
operation. However, the
to move to the previous track. It will go to the beginning
of the current track instead.
●
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Notes:
●
This unit only supports "MPEG-1 Audio Layer-3"
format. (Sampling Frequency is 32, 44.1, 48kHz)
●
"MPEG-2 Audio Layer-3", "MPEG-2.5 Audio Layer-3"
and MP1, MP2 format are not supported.
●
Playback order for MP3 files may differ depending on
the writing software used during file download.
●
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
●
For MP3/WMA files, please put ".MP3" ".WMA"
extension. Files cannot be played back if there is no
MP3/WMA extension.
●
Playlists are not supported on this unit.
●
This unit can display Folder Name or File Name up to
32 characters.
●
Maximum total number of MP3/WMA files is 65280.
Maximum total number of folders is 255 inclusive of
root directory.
●
Folders with non playable files are also counted.
●
The display playback time may not be displayed
correctly when playing back a variable bitrate file.
●
The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
●
WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
/ ) button.
button does not allow you
E-14

Listening to the radio

TUNING/
FOLDER
■ Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button to go Tuner function.
3
Press the TUNING/FOLDER (
remote control to tune in to the desired station.
●
Manual tuning:
Press the TUNING/FOLDER (
repeatedly to tune in to the desired station.
●
Auto tuning:
When the TUNING/FOLDER (
pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
●
Auto scan tuning will skip weak signal stations.
To receive an FM stereo transmission:
●
Press the TUNER button to select stereo mode and
"ST" indicator will be displayed. "
an FM broadcast is in stereo.
●
If the FM reception is weak, press the TUNER button to
extinguish the "ST" indicator. The reception changes to
monaural, and the sound becomes clearer.
XL-DAB10
PRESET
or ) button on the
or ) button
or ) button is
" will appear when