Design Features - Rockford Fosgate Punch P1000X5D Instructions Manual

Design Features

Power/Protect LED
Power LED illuminates red when the unit
is turned on. Protect LED illuminates
yellow if a short circuit or to low of an
impedance is detected at the speaker
connections. The amplifier will auto-
matically shut down if this occurs.
4
Variable Crossover
Is a built-in 12dB/octave Butterworth filter with
a crossover point variable from 50Hz to 500Hz.
Speaker Terminals
The heavy duty, nickel-plated set-
screw wire connectors (+ and -)
will accommodate 8 AWG.
Gain Control
The input gain control is preset to match the output
of most source units.
Power/REM Terminals
The power and ground are nickel-plated set-screw
wire connectors and will accommodate 4 AWG.
The remote is nickel-plated set-screw wire con-
nector and will accommodate 8 AWG.(This termi-
nal is used to remotely turn-on and turn-off the
amplifier when +12V DC is applied.)
Crossover Switch
Selectable switch for High-Pass
(HP) or All Pass (AP)