Mechanical Instructions - Philips V50 109B5 Service Manual

4. Main panel with Bottom Tray
-Remove 2 screws for disconnect the Bottom tray as Fig. 5.
-Pull the bottom tray on press right and left side clip
to fig. 7.
5. SERVICE POSITION
Reconnect connectors, some wires and panels (chassis),
service position can be available for DC/AC measurement
as shown in Fig. 8.

Mechanical Instructions

from fig. 6
Screw
Fig. 5
Press CLIP
Fig. 6
V50 109B5
9
Go to cover page
Press clip then Pull-up
Fig. 7
Main panel
Fig. 8 SERVICE POSITION
9