Sound Settings - Philips 42PUK7809 User Manual

Sound settings

Bass
With Bass, you can adjust the level of low tones in the sound.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Bass.
3 - Press  (right) and adjust the value with  (up)
or  (down).
4 - Press , repeatedly if necessary, to close the menu.
Treble
With Treble, you can adjust the level of high tones in the sound.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Treble.
3 - Press  (right) and adjust the value with  (up)
or  (down).
4 - Press , repeatedly if necessary, to close the menu.
Surround mode
With Surround mode, you can set the sound effect of the TV
speakers. If you select Incredible surround for 2D viewing, the
TV will switch to Incredible surround 3D automatically when
you start watching 3D. If you do not want the TV to switch
automatically, select Off in Auto surround 3D.
To set the surround mode . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Surround mode.
3 - Press  (right) and select Stereo, Incredible surround or
Incredible surround 3D.
4 - Press , repeatedly if necessary, to close the menu.
Auto surround 3D
With Auto surround 3D, you can prevent the TV from
switching automatically to Incredible surround 3D when the TV
is switched to 3D.
To switch on or off . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Auto surround 3D.
3 - Press  (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
Headphones volume
With Headphones volume, you can set the volume of
connected headphones separately.
To adjust the volume . . .
1 - While watching a TV channel, press  to open the menu.
2 - Select Headphone volume and press OK.
3 - Press  (up) or  (down) to adjust the volume.
4 - Press , repeatedly if necessary, to close the menu.
Advanced sound settings
Auto volume levelling
With Auto volume leveling, you can set the TV to automatically
level out sudden volume differences. Typically at the beginning of
adverts or when you are switching channels.
To switch on or off . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Auto volume
leveling.
3 - Press  (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
TV speakers
You can send the TV sound to a connected audio device - a
Home Theatre System or audio system. With TV speakers, you
select where you want to hear the TV sound and how you want
to control it.
• If you select Off, you permanently switch off the TV speakers.
• If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to the
audio device. The TV will switch off the TV speakers when the
device is playing the sound.
• If you select EasyLink autostart, the TV will switch on the
audio device, send the TV sound to the device and switch off
the TV speakers.
With EasyLink or EasyLink autostart selected, you can still
switch to TV speakers or device speakers in the Picture and
sound menu.
To set the TV speakers . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > TV speakers.
3 - Press  (right) and select Off, TV speakers, EasyLink or
EasyLink autostart.
4 - Press , repeatedly if necessary, to close the menu.
To switch speakers directly . . .
1 - While watching TV, press  OPTIONS and select Picture
76