Special Settings - Grundig 40 VLE 7230 BH User Manual

SPECIAL SETTINGS

Searching for television
channels from the cable
provider automatically
1 Open the menu with »MENU«.
2 Select the line »SOURCE SETUP« with »
or » « and press »OK« to confirm.
Λ
– The »SOURCE SETUP« menu appears.
3 Select the line
or » « and press »OK« to confirm.
Λ
Select the option »Cable« with »
» « or » « and press »OK« to confirm.
V Λ
4
Select the line »Automatic Channel Search«
with » « or » « and press »OK« to confirm.
V Λ
– The menu appears.
SOURCE SETUP
AUTOMATIC CHANNEL
Connection Type
Country
Scan Type
Cable Scan Type
Frequency (MHz)
Network ID
Exit
Back
5 Select the line »Scan Typ« with »
and set the option »DTV« with »
6 Select the line »Cable Scan Type« with »
or » « and set the option »Quick« or »Full«
Λ
< >
with » « or » «.
– The search function »Quick« sets the channels
according to the information provided by your
cable provide in the transmission signal.
– If the option »Full« is selected, the entire fre-
quency range will be scanned. The search can
take a long time with this option. This option is
recommended if your cable provider does not
support the search type »Quick«.
----------------------------------------------------------------------------------------------------------
V
»Source« with »
V
< «, » >
20.09.2010
15:46
SEARCH
Cabel
U.K.
ATV & DTV
Quick
Auto
Auto
Start Search
« or »
V Λ
< >
« or » «.
V
Note:
You can accelerate the search. To do this,
7
you need information about the frequency
and network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
«
frequency 402MHz and network ID 61441
can be entered for Germany.
7 Start the scan with » « (red).
«
– All channel and favourites lists will be
deleted and compiled anew.
«,
Note:
After starting the scan, a security query will
7
appear. Press » « (green) to confirm the
option »Yes«.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
You can abort the search by pressing
7
»MENU«.
8 Press »MENU« to end the setting.
«
«
63
ENGLISH