Operating The Receiver With The Television Remote Control - Grundig LXW 68-9740 User Manual

RETROFITTING A DIGITAL RECEIVER
Operating the receiver with the television remote
control
Note:
The receiver must be connected and installed to the G bus on the
television set via the communication line.
Switches the television off (standby).
1...0 Switches the television on from standby mode.
Selects channels directly.
?
Displays information on the selected function.
You receive the station information of the digital
receiver after changing station or by looking in the
electronic TV guide.
E Opens the »Format« menu.
Then use
Displays an inset picture.
PIP
Returns to normal picture.
Opens the pre-selection for AV channels.
AV
Then select with
d
Sound on/off (mute).
i
Opens the television »EASY DIALOG« menu
(main menu).
You can find the main menu of the digital receiver in
the »EASY DIALOG« menu.
Switches back one menu level in the receiver.
Z
Switch the television on from standby;
P+, P-
Select stations step by step;
Move the cursor in the menus up and down.
Adjust the volume;
Move the cursor left/right.
OK Opens the station or favourites list on the receiver;
activates various functions.
Switches between teletext mode and TV mode on the
TXT
television (only the television teletext can be used).
Opens and closes the electronic TV guide on the
TV-G
receiver.
or to make the selection.
P+ P-
P+ or P-.
29