Download Print this page
Casio 4749 Operation Manual

Casio 4749 Operation Manual

Casio watch

Advertisement

Quick Links

MO0701-EA
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
• • • • • This watch does not have a city code that corresponds to the Greenwich
Mean Time differential of –3.5 hours. Because of this, the radio-controlled
atomic timekeeping function will not display the correct time for
Newfoundland, Canada.
Keep the watch exposed to bright light
Bright light
Solar cell
• The measurement functions built into this watch are not intended for use in taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonably accurate representations only.
• The Tide Graph displayed by this watch is not intended for navigational purposes.
Always use proper instruments and resources to obtain data for navigation
purposes.
• This watch is not an instrument for calculating low tide and high tide times. The
Tide Graph of this watch is intended to provide a reasonable approximation of
tidal movements only.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
claims by third parties that may arise through the use of this watch.
General Guide
Manual Receive
Transmitter Change
Press any button.
Time/Date Adjustment
• About 1.5 seconds after you enter the World Time Mode or Alarm Mode from
another mode, the watch's hands will start to move to the time setting for the mode
you entered. All button operations are disabled while the hands are moving. If you
need to pass through the World Time Mode or the Alarm Mode to get to another
mode (such as when going from the Tide Graph Mode to the Timekeeping Mode),
press C (mode change) to advance to the next mode before the hands start
moving. Once the hands do start moving, you will need to wait until they stop before
you can advance to the next mode.
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and updates its time setting accordingly.
• Supported time calibration signals: Germany (Mainflingen), England (Rugby), United
States (Fort Collins), Japan (Fukushima or Fukuoka/Saga).
• See the information under "Signal Reception Troubleshooting" if you experience
problems with time calibration signal reception.
Current Time Setting
This watch adjusts its time setting automatically in accordance with a time calibration
signal. You also can perform a manual procedure to set the time and date, when
necessary.
• The first thing you should do after purchasing this watch is to specify your
Home City, which is the city where you will normally use the watch. For more
information, see "To specify your Home City".
• When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See "Timekeeping"
for more information about manual time settings.
• The U.S. time calibration signal can be picked up by the watch while in North
America. The term "North America" in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
Operation Guide 4749
The electricity generated by the solar cell of the watch is
stored by a built-in battery. Leaving or using the watch
where it is not exposed to light causes the battery to run
down. Make sure the watch is exposed to light as much as
possible.
• When you are not wearing the watch on your wrist,
position the face so it is pointed at a source of bright
light.
• You should try to keep the watch outside of your sleeve
as much as possible. Even if the face of the watch is
blocked only partially from light, charging will be reduced
significantly.
Warning!
Receive Status Check
Hold down A
for about two seconds.
Press A.
Timekeeping Mode
Hold down A
for about five seconds.
Press A.
• The watch continues to operate, even when it is not exposed to light. Leaving the
watch in the dark can cause the battery to run down, which will cause some watch
functions to be disabled. If the battery goes dead, you will have to re-configure watch
settings after recharging. To ensure normal watch operation, be sure to keep it
exposed to light as much as possible.
Battery charges in the light.
Bright light
Solar cell
Electrical
(Converts light to
energy
electrical power.)
All
LEVEL 1
functions
LEVEL 2
enabled.
Charge
LEVEL 3
Rechargeable battery
• The actual level at which some functions are disabled depends on the watch model.
• Be sure to read "Power Supply" for important information you need to know
when exposing the watch to bright light.
If the analog hands aren't moving...
If the analog hands aren't moving, it means that the power saving mode has stopped
them to save battery power.
• See "Power Saving" for more information.
• The hands also stop whenever the battery level reaches Level 3.
About This Manual
• Button operations are indicated using the letters shown
Minute hand
in the illustration.
• The actual bezel of the watch is imprinted with all available
Stopwatch second hand
city codes. For the sake of simplicity, the illustrations of this
Hour hand
User's Guide omit some of the city code.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
Bezel
Date
24-Hour hand
Day of the
week hand
Second hand
Tide Graph Mode
Press C.
Timekeeping Mode
Press C.
Press B or D.
Stopwatch Mode
Press D.
(When the stopwatch
is reset to all zeros.)
To specify your Home City
1. In the Timekeeping Mode, hold down A for about five
Stopwatch
City code
seconds until the watch beeps twice. This indicates the
second hand
watch is in the setting mode.
• Entering the setting mode will cause the stopwatch
second hand to move to the city code of the currently
selected Home City.
2. Use D to change the Home City setting.
• Each press of D causes the stopwatch second hand
to advance clockwise to the next city code.
• All hands (except for the second hand) and the date
display will change automatically to the applicable
settings for the currently selected city code. All button
operations are disabled while the hands and date
display are changing.
• Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
German/U.K. Signal
Japan Signal
City
City
City Name
City Name
Code
Code
LON
London
HKG
Hong Kong
PAR
Paris
TYO
Tokyo
ATH
Athens
• In addition to the above, you also can select city codes that are outside the ranges
of the time calibration signal transmitters supported by this watch.
• Note that this watch does not have a city code that corresponds to Newfoundland.
3. After the Home City setting is the way you want, press A to return to the
Timekeeping Mode.
• Normally, your watch should show the correct time as soon as you specify your
Home City code If it does not, it should adjust automatically after the next auto
receive operation. You also can perform manual receive or you can set the time
manually.
Battery discharges in the dark.
All functions disabled,
except for analog timekeeping
and stopwatch .
LEVEL 1
Dis-
LEVEL 2
charge
All
LEVEL 3
functions
disabled.
World Time Mode
Press C.
Alarm Mode
Press C.
U.S. Signal
City
City
City Name
City Name
Code
Code
HNL
Honolulu
DEN
Denver
ANC
Anchorage
CHI
Chicago
LAX
Los Angeles
NYC
New York
1

Advertisement

loading

Summary of Contents for Casio 4749

  • Page 1 Operation Guide 4749 Getting Acquainted Congratulations upon your selection of this CASIO watch. To get the most out of your • The watch continues to operate, even when it is not exposed to light. Leaving the purchase, be sure to read this manual carefully.
  • Page 2 Operation Guide 4749 • Even if the time calibration signal is received correctly, there are some times when Reception Ranges U.S. Signal the analog hands may not indicate the correct time. If this happens, use the U.K. and German Signals procedures under “Adjusting the Home Positions”...
  • Page 3: Tide Graph

    Operation Guide 4749 Tide Graph The Tide Graph calculates and graphically represents Tide Graph Viewing the Latest Signal Reception Results current tide conditions in your Home City or a port city in You can use the procedure below to check whether or not the last signal receive the vicinity of the Home City based on longitudes, lunar operation was successful.
  • Page 4: World Time

    Operation Guide 4749 World Time Adjusting the Home Positions The World Time Mode shows you the current time in 27 If the time and date settings are wrong even after the time calibration signal is Current time (hour) in the cities (29 time zones) around the world.
  • Page 5: Power Supply

    Auto Return Features or CASIO distributor about having it replaced. • If you leave the watch in the Alarm Mode for two or three minutes without performing • Never try to remove or replace the watch’s special battery yourself. Use of the wrong any operation, it returns to the Timekeeping Mode automatically.
  • Page 6: Lunitidal Intervals For Each City

    Operation Guide 4749 Power Saving Power Saving enters a sleep state automatically whenever the watch is left for a certain period in an area where it is dark. The table below shows how watch functions are affected by Power Saving.