JVC LYT0087-001B Instructions Manual page 18

18
EN
DATE/TIME
Select Dial
Date display
Time display
Date/Time display
Auto Date
Record mode
The characters you have set using
Character Generator (
Date display
25.12.98
Time display
22:50:00
Date/Time display
25.12.98 22:50:00
VIDEO RECORDING
Display
Date-off mode
(No display)
pg. 27)
Auto Date Record mode
AUTO DATE
Auto date record mode
25.12.98
Auto date record
executed
FEATURE: Date/Time/Character Insert
PURPOSE: To display the date and time in the
viewfinder or on a connected colour
monitor, as well as to record them
manually or automatically.
OPERATION: 1) Turn the Select Dial to any
position except AUTO LOCK.
2) Choose a display mode by
pressing DATE/TIME repeatedly
while in Record-Standby to cycle
through the modes as shown in the
illustration to the left.
NOTES: DISPLAY
The selected display can be
recorded.
If you don't want to record the
display, select the Date-off mode
before shooting.
If you want to delete the display
during shooting, press DATE/TIME.
To recall the display, engage the
Record-Standby mode and press
DATE/TIME repeatedly until the
desired display appears.
Even if you shoot with the date/
time displayed during Digital Still
Camera Shooting, they will not be
recorded.
AUTO DATE RECORD
Your camcorder automatically
records the date for about 5
seconds after recording is initiated
in the following situations:
•
•
•
In this mode, the date is replaced
after 5 seconds with "AUTO DATE"
but this is not recorded.
Setting the Select Dial to AUTO
LOCK always engages the Auto
Date Record mode, and disables
all other modes.
Basic Features (cont.)
You should have already
performed the Date/Time Setting
procedure ( pg. 9). If you
haven't, do so first.
After changing the date.
After loading a cassette.
After Auto Date Record mode is
selected by pressing DATE/TIME.