Table of Contents
Advertisement
50
VCR/TV Connection
Lens
CAM stand
1
CONNECT CAMCORDER TO TV OR
VCR
Connect as shown in the illustration.
• It is recommended to place the camcorder on
the CAM stand for playback (
2
TURN ON POWER
Turn the Power Dial to "PLAY" and turn on the
TV/VCR.
3
SELECT TV'S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
If Using A VCR . . . go to step 4.
If not . . . go to step 5.
4
CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR's instruction manual.
5
START PLAYBACK
Press 46. You can watch the scenes you
recorded on the TV.
6
END PLAYBACK
Press
and, if you're not going to continue
5
using the camcorder, set the Power Dial to
"OFF".
Core filter
To AUDIO OUT
To VIDEO OUT
AUDIO and VIDEO cables
(ø3.5, DVM1 to TV or VCR)
VIDEO OUT select switch (Y/C or CVBS)
To VIDEO IN connector
To AUDIO IN
connectors
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time, Time Code
.... set to "ON" or "OFF" in the Playback Menu
pg. 10).
•Playback Sound Mode Display
.... set the Power Dial to "REC", and set "ON
NOTES:
When using the provided VIDEO cable
(ø 3.5, DVM1 to TV or VCR) or AUDIO cable (ø
3.5, DVM1 to TV or VCR), make sure you
connect the end of the cable with the core filter to
the camcorder. The core filter improves perform-
ance of equipment.
Before opening the cassette cover, disconnect the
headphones and AUDIO/VIDEO connectors from
the jacks because the cassette cover will interfere
with them.
For camcorders sold in the U.K., set the VIDEO
OUT select switch of the Cable adapter as
required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
PLAYBACK
Cable adapter
(provided only with U.K. models)
(
pg. 54).
SCREEN" in the Date/Time Menu (
to "ON" or "OFF". Then set the Power Dial
back to "PLAY".
Basic Connections
To TV or VCR
VCR
(Recording deck)
pg. 12)
Advertisement
Table of Contents
