To Assign Sequential Numbers To Recorded Start 10'S - Panasonic sv-3200 Operating Instructions Manual

RENUMBER
PNO/START ID
AUTO
1 2
START ID
-­
ID
o
~~~==~~-r-c=J
REW/REV
3 4
10 WRITE
To Assign Sequential Numbers to Recorded
Start 10's (Renumber)
After recording of start 10'5, press the renumber
button.
ne
is
The tape will rew ind to the beginning, the unit searches lor the
recorded start 10's, and assigns program numbers to them in
sequence starting from 01. When the tape reaches the end, the
renumber lunctions is complete, and the tape is rewound to the
beginning again (auto rewind function).
While the tape is running, the play indicator lIashes.
Each time the tape comes to a position where a start 10 has been
recorded , the
~
indicator illuminates.
ng.
Ing
IrtS
To Record Absolute Time with the Index Function - - - - - - - - - - ­
Even on tapes where absolute time has not been recorded, it can be
recorded while indexing is being carried oul.
1
Enter the "AUTO" mode.
Press the PNO/start 10 auto button il the PNO/start 10 auto
indicator is not illuminated.
2
Press the start 10 button to put the unit in the
automatic program number recording mode.
The ~ indicator will lIash.
-33 ­
3
Press the rew/rev button to rewind the tape to
the beginning.
4
Press the 10 write button.
Start 10's will be recorded on the tape automatically, together
with absolute time.
If program numbers, start 10's, skip 10's, and end mark have been
recorded in any part 01 the tape, they are all erased during a new
recording.
/ 1 , \
/
\
( ')
.
. :#: