Brother 888-F50 Operation Manual page 44

Brother sewing machine operation manual
Hide thumbs Also See for 888-F50:
Table of Contents

Advertisement

Sewing
CAUTION
• Do not press
(Thread cutter button) after
the threads have been cut. Doing so could
tangle the thread or break the needle and
damage the machine.
• Do not press
(Thread cutter button) when
there is no fabric set in the machine or during
machine operation. The thread may tangle,
possibly resulting in damage.
Note
• When cutting thread such as nylon monofilament
thread, or other decorative threads, use the
thread cutter on the side of the machine.
k
When the needle has stopped moving, raise the presser
foot and remove the fabric.
■ Using the foot controller
You can also use the foot controller to start and stop
sewing.
CAUTION
• Do not allow fabric pieces and dust to collect
in the foot controller. Doing so could cause a
fire or an electric shock.
Memo
• When the foot controller is being used, you
cannot start sewing by pressing the "Start/Stop"
button.
• Bobbin winding can be started and stopped with
the foot controller.
a
Turn off the machine.
B-36
b
Insert the foot controller plug into its jack on the
machine.
1
1 Foot controller jack
c
Turn on the machine.
d
Slowly depress the foot controller to start sewing.
Memo
• The speed that is set using the sewing speed
controller will be the foot controller's maximum
sewing speed.
e
Release the foot controller to stop the machine.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

888-f60888-f62888-f70888-f72888-f52

Table of Contents