Connecting To A Tv; Installing Speakers On Half Tallboy Stand - Samsung HT-F450K User Manual

Installing the Speakers on the Half Tallboy
Stand
* HT-F453HK only - Front Speakers
1. Stretch out the speaker cables as shown and arrange it
through the hole of the stand base .
2. When done, use the stand driver to tighten the stand
nut as shown.
3. This is the appearance after the speaker is installed.
Follow these steps to install another speaker.
4. If you want to adjust the height of the speaker, loosen
two screws on the rear of the speaker.
5. Pull up the speaker in the arrow direction. Fit the speaker in
a height adjusting hole of your choice.
!
CAUTION : Be careful as an excessive force may result in
a physical damage.
6. Insert two screws clockwise into the hole on the rear of
the speaker using a screwdriver as shown and tighten
back 2 screws.
7. This is after the height of the speaker is adjusted.
You can repeat these steps above at any time if you
want to readjust the height.

Connecting to a TV

Select either Method 1 or Method 2.
• If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote
control, and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video
from the home cinema.
SPEAKERS OUT
SURROUND SUBWOOFER SURROUND
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
VIDEO
AUX IN 2
OUT
FM ANT HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
1
2
3
4
5 6
7
Method 2
Method 1
13
|
English