Brightness Adjustment Of The Display; Grip Adjustment; Tripod Mounting - JVC GZ-MG20AA Instructions Manual

Brightness Adjustment of the
Display
The brightness of the display can be adjusted.
1
Set the power switch to
pressing down the lock button located on the
switch.
2
Open the LCD monitor fully. (
3
Press MENU. The menu screen appears.
4
Press / to select [DISPLAY], then press
49.
5
Press / to select
[BRIGHT], and press 49.
The brightness control
indicator appears.
6
Press / until the appropriate brightness
is reached.
7
Press 49 to clear the brightness control
indicator from the display.
1
2
through the loop and grasp
or while
the grip.
3
fingers through the grip to
pg. 9)
easily operate the
recording start/stop button,
power switch and zoom
lever. Be sure to fasten the
velcro strip to your
preference.
To attach the camera to a
tripod, align the direction
stud and screw to the
mounting socket and
stud hole on the camera.
Then tighten the screw
clockwise.
GETTING STARTED

Grip Adjustment

Adjust the velcro strip.
Pass your right hand
Adjust your thumb and

Tripod Mounting

Some tripods are not
equipped with studs.
19
EN