Basic Connection - QuantumFX PDT-91 Instruction Manual

Basic connection

l
Ensure all the cables are disconnected from the main unit before connecting to AC power
source by AC power adaptor.
l
Read through the instructions before connecting other equipment.
Connecting to AC power source
Main unit
NOTE:
Before connecting to AC power, push the
POWER ON/OFF switch to OFF.
Rechargeable battery use
The player built-in a rechargeable lithium battery.
1. Charge the battery
-Connect the adaptor to the DC 12V IN jack, then set the unit in POWER ON mode (THE
PLAYING MODE) for fully charge.
-Set in POWER OFF mode for fully charge.
And the indicator is red during charging; it gets green when charging is completed.
2.Time to recharge the battery
Recharge and playback time depends on battery pack capacity and the temperature
condition.
Generally speaking, the battery needs to be charged about 2 hours.
3.Using and maintaining rechargeable battery
-.The normal working condition temperature is: 0 ~45
-.Always unplug AC/DC power supply for the unit whenever not playing.
NOTE: A new battery which has not been used or one which has not been used for more
than a month, may appear to not recharged enough, this is due to the characteristic of this
battery and is not a malfunction. In this case, recharge it two or three times before the first
use, and it needs more than 8 hours to recharge battery.
Noises may be generated during recharging. In this case, use a more distant power socket.
Do not recharge or discharge battery near a heating element such as a heater or direct
sunlight.
O
C;
8
To power outlet