Control Panel Warning Messages - HiTi Digital CS-200e User Manual

4.1.2 Control panel warning messages

PMessages Displayed
Cover Open Top cover door is opened
Flipper Cover Open Flipper cover door is opened
IC Chip Missing Ribbon IC chip is not inserted
Ribbon Missing Ribbon is not installed
Ribbon Mismatch Installed ribbon does not match with ribbon IC chip ID
Ribbon Type Error Unsupported ribbon type
Failing to searching ribbon
Ribbon Out
End of ribbon usage
Print Fail Fail to start printing process
Card runs out
Card Out
Sensor cannot detect cards with full loading cards
Card Jam Jammed during operation
Card Mismatch Different types of cards
Cam Error Internal mechanical cam platen error
Flipper Error Flipper unable to perform its duty
Ribbon Error Ribbon's IC chip error
Reasons
19
Solutions
Close the top cover door.
Close the flipper cover door.
Install ribbon IC chip into printer's IC chip socket.
Install ribbon with corresponded IC chip into printer.
Check ribbon type and install the corresponded IC chip.
Check ribbon's region code with matching printer's region code.
Reinstall the ribbon again with correct installation procedure.
Reinstall a new ribbon with IC chip.
Contact your local service center for professional advice.
Place more cards with card's weight module.
Check the card thickness level to match up with inserted cards.
Follow the LCM screen for releasing card jam instructions.
Use CR-80 standard cards.
Contact your local service center for professional advice.
Contact your local service center for professional advice.
Reinsert IC chip again or change a new IC chip if it's required.
HiTi CS-200e user manual