Variable Slow Playback - JVC GY-DV5100 Instructions Manual

8-5 Variable Slow Playback

EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
CH-1
MODE
BACK L STRETCH
NORMAL NORMAL VTR
SPOT L COMPRESS CAM
POWER VTR
ON OFF
■ During stop, playback or still playback, slow motion playback
is effected by pressing the EDIT SEARCH + button.
Pressing the EDIT SEARCH – button effects reverse slow
motion playback.
Variable Slow Playback
● Playback in FWD direction becomes faster each time
the EDIT SEARCH + button is pressed.
0.1 (SLOW+1) 0.2 (SLOW+2) 0.5 (SLOW+3)
1 (FWD) 0.1 (SLOW+1) ..
● Playback in REV direction becomes faster each time
the EDIT SEARCH – button is pressed.
–0.1 (SLOW–1) –0.2 (SLOW–2) –0.5
(SLOW–3) –1 (REV) –0.1 (SLOW–1) ..
* The characters indicated in parentheses ( ) are shown
on the Status screen.
■ To return to the normal playback mode, press the PLAY
button.
■ To stop, press the STOP button.
■ The amount of frames advanced in slow motion playback
can be set in STEP SLOW MODE on page 86.
8. PLAYBACK MODE
EDIT SEARCH
EDIT SEARCH
+ button
OPEN
LCD BRIGHT DISPLAY
EDIT SEARCH
AUDIO
LEVEL PULL
OPEN
FRONT
REAR ATUS
CH-2
CH-1 CH-2
AUDIO IN – button
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
8. PLAYBACK MODE
8-6 Outputting CH-3, CH-4 Channel Audio
The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-DV5100
records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input.)
When the GY-DV5100 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH-
4 channels, the AUDIO SELECT item on the AUDIO/VIDEO menu screen must be set.
.3 5600K
.4 5600K / ND 1 64
SHUTTER
MENU
AUTO IRIS
SHUTTER dial STATUS button
TOP MENU screen
––– MENU –––
AUDIO/VIDEO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET
EXIT
AUDIO/VIDEO menu screen
––– AUDIO/VIDEO –––
TEST TONE
AUDIO MODE
A.OUT AT SEARCH ON
CH1 FRONT VR
WIND CUT
AUDIO REF.LEVEL –20dB
AUDIO SELECT
AUDIO MONITOR
SET UP
PAGE BACK
MEMO:
After-recording on the CH-3 and CH-4 channels is not
possible.
63 64
STATUS
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K / 1 8 ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
FULL AUTO MODE
BACK L STRETCH
NORMAL NORMAL VTR
SPOT L COMPRESS CAM
POWER VTR
ON OFF
VTR indicator
Setting
■ Confirm that the GY-DV5100 is in the VTR mode. (VTR
indicator: On)
1.
Press the STATUS button for 1 second or longer to display
CANCEL
the TOP MENU screen.
2.
Rotate the SHUTTER to align the cursor ( ) with the AUDIO/
VIDEO menu, and then press the SHUTTER dial.
● The AUDIO/VIDEO menu screen appears.
3.
Rotate the SHUTTER to align the cursor ( ) with the AUDIO
SELECT item, and then press the SHUTTER dial.
● The setting area of the selected item starts blinking.
ON
32K
4.
Rotate the SHUTTER dial to change the setting.
ENABLE CH1/2 : To reproduce the sound (CH-1, CH-2)
BOTH
recorded during shooting.
MIX : To reproduce the sound recorded during
CH3/4
shooting (CH-1, CH-2) and the after-recorded
MIX
7.5%
sound (on CH-3 and CH-4) simultaneously.
CH3/4 : To reproduce the sound after-recorded on CH-
3 and CH-4.
5.
When the SHUTTER dial is pressed, the set value is
confirmed.
6.
To return to the normal screen, use either of the following
methods.
● Press the STATUS button
or
● Return to the TOP MENU screen and then select the EXIT
item before pressing the SHUTTER dial.
OPEN
LCD BRIGHT DISPLAY
AUDIO
LEVEL PULL
OPEN
FRONT
REAR
CH-1 CH-2
CH-1 CH-2
AUDIO IN
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL