Installation Instructions; Unpacking Your Dryer - GE WX9X2 Installation Instructions Manual

Ge dryers installation instructions

Hide thumbs

Table Of Contents

Table of Contents

Available languages

UNPACKING YOUR DRYER

Tilt the dryer sideways and remove the foam

shipping pads by pulling at the sides and breaking

them away from the dryer legs. Be sure to remove all

of the foam pieces around the legs.

Remove the bag containing the literature.

ROUGH-IN

DIMENSIONS

Front View

NOTE:

Dryer height can be adjusted to match washer height

With Pedestal: 52.1" (132.33 cm)

Stacked: 84" (213.36 cm)

STEAM WATER HOSES:

GE strongly recommends the use of factory specified parts.

These hoses are manufactured and tested to meet GE

specifications.

GE strongly recommends the use of new water supply hoses.

Hoses degrade over time and need to be replaced every 5

years to reduce the risk of hose failures and water damage.

Parts and Accessories

Order on-line at GEApplianceParts.com, 24 hours a day or

by phone at 800.626.2002 during normal business hours.

POWER CORDS:

GE strongly recommends the use of factory specified parts.

Select the power cord to fit your installation requirements.

Order on-line at GEApplianceParts.com, 24 hours a day or

by phone at 800.626.2002 during normal business hours.